The frame is designed reasonably and adopts thickened steel plate, which is strong and durable, reduces the vibration generated by the engine and prolongs the life of the machine.
The lengthened underframe makes the contact area of the track longer and wider, and also ensures the stability of the front and rear of the machine, making climbing and crossing ditches more safe and smooth through complex terrain. (120 horsepower heightened and widened chassis).
The engine adopts 4-cylinder 4100 turbocharged, Laidong / Huichai and other engines.
The gearbox adopts the special gearbox for crawler tractors independently developed by our factory. It has strong power and flexible response. There are 4 forward gears, 1 reverse gear, high and low speed gears, and high and low speed gears for the rear power output.
The steering of the machine adopts hydraulic unilateral cut-off power, which reduces the wear on the brake (disc and disc) and prolongs the service life.
Rear mount suspension (with suspension) common to all wheeled tractor implements.
The hydraulic system of this vehicle is hydraulic transmission oil, which is resistant to high temperature and equipped with an 80-mesh filter, which can effectively filter iron filings and impurities in the transmission oil. Install a hydraulic oil radiator to reduce the temperature of the transmission oil during use to avoid damage to the gearbox and control failure.
Installing a water tank radiator and increasing the capacity of the water tank can effectively reduce the high temperature generated by the engine during use. (120 horsepower to increase the water tank).
The air filter is a dry filter, which can filter a large amount of dust and soil. (120 hp with increased air filter).
120 horsepower is installed with a 100A enlarged battery, and the battery life is long.
One side adopts the design of installing 1 driving wheel, 8 supporting wheels, 4 suspension wheels, 2 top wheels, and 1 tensioning wheel. Using 8 supporting wheels can effectively distribute the weight of the machine to each On a wheel, thereby reducing the weight of the wheel, making the wheel more durable and wear-resistant.
The use of 2 top wheels can reduce the vibration of the track and prevent the track from derailing.
The sheet metal parts of the machine are made of thickened steel plates above T6, which are durable and not easily deformed.
The paint color is made of high-quality spray powder, which has strong adhesion and good weather resistance.
The diesel tank has a large capacity and a long battery life (120 horsepower dual diesel tanks increase the capacity).
Use high-quality two-way distributor, long life and fast response.
|Dimensions (L*W*H)||2900MM * 1800MM * 1650MM|
|engine brand||Laidong / Huichai|
|bare metal quality||1950KG|
|fuel consumption||3 liters/mu|
|Walking speed||Fastest 45KM/H|
|work efficiency||8 ~ 10 mu / H|
|gear||Four advances and one retreat, high and low speed can be switched|
|operate||The hydraulic clutch cuts off the power unilaterally, and the left and right direction levers operate the steering.|
|link method||With rear output and rear suspension, the three-point suspension is common to four-wheel vehicles.|
|transfer method||gear drive|
|Launched Shovel Equipment||Width 130CM ~ 140CM, height 45CM|
|Rotary Tiller Equipment||Width 130CM / 150CM, depth 25 ~ 35CM|
|Trench equipment||Offset trenching, width 40CM, depth 40 ~ 50CM, depth 0 ~ 40CM adjustable|
|Straw returning machine equipment||Width 130CM / 150CM, two curved and straight swing knife design|
|Tree digging machine equipment||Diameter 30CM ~ 50CM|
|other devices||Grape vine burying equipment, simple canopy equipment, double plow equipment, etc.|
The gearbox is a patented product with reliable performance. There are four forward gears with high and low speeds. There are eight forward gears in total, including neutral gear and reverse gear.
The rear output of the gearbox has two speed gears, the low speed is 540 rpm, and the high speed is 720 rpm.
The steering of the machine adopts hydraulic forced unilateral brake steering, and the power is cut off during the steering process, which can effectively protect the gearbox and brake system and make it more durable.
The machine has rear output, suspension and strong lifting and strong lowering, and can be used with wheeled tractor farm implements.
The front of the fuselage can be equipped with a bulldozer blade and a loader bucket, which truly realizes one machine with multiple functions, and can be used for both agricultural and engineering purposes.
The design of crawler tractors has better adaptability than wheeled tractors, with a low chassis, good stability, and a large crawler adhesion coefficient, which can effectively resist slopes and downhill slopes. Crawler tractors belong to all-terrain operating machines, which have the maneuverability of turning and steering on the spot, and have stronger climbing and off-road performance.